NR-60LVHS
SPRAYABLE POLYURETHANE
NORMAC NR-60LVHS 100% solids 2:1 Polyurethane spray coating cures to 60A shore hardness. Designed using PTMEG Polyether with low-free technology which virtually eliminates isocyanate exposure. Where softer coatings are required, this formulation shows superior qualities like abrasion resistance, high elongation, and strong tensile strength. Also excels where non-marking gripping and friction control are essential. Easily processed by dual cartridge or heated plural component equipment.
Seamless Monolithic
Soft and Supple
Application Speed
Low Coefficient of Friction
Noise reduction
Seamless Monolithic
Soft and Supple
Application Speed
Low Coefficient of Friction
Noise reduction
Prepolymer: PTMEG-Low Polyether
Solids: 100%
VOC’s: Zero
Hardness Shore A: 60 +/-5
Colour: All standard
Shelf Life: +2 years unopened
Storage: 15°C-30°C (60°F-86°F) dry, away from sunlight
Tensile Strength: ASTM D412 ~ 14.32MPa (2077psi)
Elongation: ASTM D412 ~ 779%
Tear Strength: ASTM D624 Die C ~ 36.88kN/m (272lbf-in)
Taber Abrasion 1kg, 1000cy, H-18: ASTM D4060-19 ~ 107mg loss
Impact Resistance: ASTM D2794 ~ >28.02kN/m (160pli)
Dry/wet operating temperature: -56°C (-70°F) to 93°C (200°F)
Immersion Operating Temperature: Max 60°C (140°F)
Vapor Transmission: ASTM E96-80 ~ < 0.10
Chemical Resistance: usually pH 3 - 11
Coverage: 34sqm @ 25micron/kg (166sqft @ .001”/ lb)