Prepolymer: MDI Polyether
Hardness Shore A: 65 +/-5
Solids: 100%
VOC’s: Zero
Mix ratio: 1A:1B
Colour: Black, others available
Flash Point: None
Shelf Life: 3 years unopened
Storage: 15C-30C (60F-86F) dry, away from sunlight
Tensile strength ASTM D412: 9.31MPa (1350psi)
Elongation ASTM D412: 525%
Tear Strength ASTM D624 Die C: 36.78kN/m (210lbf-in)
Taber abrasion 1kg, 400cy, H18 ASTM D4060-19: 218mg loss
Dry/wet operating temperature: -56C (-70F) to 93C (200F)
Immersion operating temperature: max 60C (140F)
Chemical Resistance: usually pH 3 - 11
Coverage: 34sqm @ 25micron/kg (166sqft @ .001”/lb)
Per Unit: 200 x 200 cartridge 0.12sqm @ 3mm (1.25sqft @ 1/8”)
750 x 750 cartridge 0.44sqm @ 3mm (4.7sqft @ 1/8”)
UR-60NS
Multi-Purpose Fast Polyurethane
NORMAC UR-60NS is a non-sag putty, fast room-temperature curing 65A Polyurethane coating and repair material designed to get material processors back-up and running quickly. Packaged for easy on ratio mixing using our dual cartridge dispensing system. Used with the correct primer, this material will adhere well to most surfaces including rubber, polyurethane, PVC belting, and metal.
Fast Curing
Non-Sag Putty
Long Lasting
Easy on Ratio Mixing
Strong Adhesion
Applications
Conveyor belt and flights
Conveyor clip joint protection
Covering bolt heads
Rubber linings/sheeting
Caulking joints
Pump casings and impellers
Pipes, fluid handling equipment
Pulley lagging
Gasket seals
OTR tire sidewall