Prepolymer: PTMEG-Low Polyether
Hardness Shore A: 80+/-5
Solids: 100%
VOC’s: Zero
Mix ratio volume: 2A:1B
Mix ratio weight: 100A:47B
Colour: Black, others available
Shelf Life: +2 years unopened
Storage: 15°C-30°C (60°F-86°F) dry, away from sunlight
Tensile strength ASTM D412: 12.65MPa (1835psi)
Elongation ASTM D412: 490%
Tear Strength ASTM D624 Die C: 47.81kN/m (273lbf-in)
Taber Abrasion 1kg, 1000cy, H18 ASTM D4060-19: 35mg loss
Dry/wet operating temperature: -56°C (-70°F) to 93°C (200°F)
Immersion operating temperature: Max 60°C (140°F)
Chemical Resistance: usually pH 3 - 11
Mix density: 1.042g/cm3 (.038lb/CI)
Coverage: 34 sqm @ 25 micron/kg (166 sqft/lb @ .001”)
Per Unit: 300 x 150 cartridge, 0.12sqm @ 3mm (1.3sqft @ 1/8”)
600 x 300 cartridge, 0.24sqm @ 3mm (2.6sqft @ 1/8”)
750g Can kit, 0.2sqm @ 3mm (2sqft @ 1/8”)
UR-80LV
Low Viscosity Liquid Polyurethane
NORMAC UR-80LV is a low viscosity liquid paste, room-temperature curing 80A Polyurethane coating designed for lasting surface protection and to repair existing substrates against wear, abrasion, and corrosion. Designed using PT-MEG Polyether with low-free technology which virtually eliminates isocyanate exposure. Working characteristics include self-leveling and or trowelable type applications requiring extended flowability. Packaged for easy on ratio mixing using our dual cartridge dispenser or hand mixing can kits. Used with primer, this material will adhere well to rubber, metal, polyurethane, polyurea, and concrete substrates.
Low Viscosity
Self-leveling and or trowelable
Eliminates isocyanate exposure
Packaged for easy on ratio
mixing
Dual Cartridge Dispenser or Can Kits
Applications
Rubber linings/sheeting
Conveyor belts and flights
Conveyor clip joint protection
Pumps and impellers
Penetration sealing
Pipes, fluid handling equipment
Chutes, screens, wear plates
Shock absorbers
Storage hoppers
Deburring machine
Guide bearing